How To Restring A Twelve String Guitar: Step-by-Step Guide For Beginners

Photo of author
Written By Bernirr

I'm fascinated by the Yamaha brand's craftmanship, but above all I'm fascinated by Music, and I love Sports. Reach me via my socials for a link to my Spotify playlists. 

Hey there fellow musicians! Are you ready to learn how to restring a twelve-string guitar? If you’re new to playing or just need a refresher, I’ve got you covered. As someone who has played countless gigs and gone through many sets of strings, I know the importance of knowing how to properly restring a guitar. Don’t let those extra six strings intimidate you – with this step-by-step guide, you’ll have your twelve-string sounding brand new again in no time. So grab your guitar and let’s get started!

In this article, we will go over all the necessary steps for changing out your old strings and replacing them with shiny new ones on your twelve-string guitar. From gathering the right tools and materials to tuning up those extra pairs of strings, I’ll walk you through each process so that by the end, you’ll feel like a pro at restringing any size guitar. Let’s dive in and get your twelve-string sounding better than ever before!

So, how to restring a twelve string guitar?

Restringing a twelve string guitar may seem daunting at first, but with the right tools and a step-by-step guide, it can be done easily even by beginners. Here’s how:

Step 1: Gather your materials
Before you begin, make sure you have all the necessary materials on hand. This includes a new set of strings specifically designed for a twelve string guitar, wire cutters or pliers, and a tuner.

Step 2: Remove the old strings
Start by loosening and removing all of the old strings from your guitar. You can do this by turning the tuning pegs counterclockwise until they are loose enough to pull out completely.

Step 3: Clean your guitar
While your guitar is free of strings, take this opportunity to clean it thoroughly with a soft cloth or brush. This will help remove any dirt or residue that may have accumulated under the strings.

Step 4: Prepare the new strings
Unpack your new set of strings and lay them out in order from thickest to thinnest. This will make it easier when you start restringing.

Step 5: Start with the low E string
Begin by inserting one end of the low E string into its corresponding bridge pin hole on the bottom side of your guitar. Then thread it through its designated tuning peg on top.

Step 6: Tune and stretch
Once you have threaded all six pairs of strings onto their respective tuning pegs, use your tuner to tune each pair to their proper notes (E – A – D – G – B – E). Afterward, gently stretch each pair along their length several times to ensure they stay in tune longer.

Step 7: Repeat for remaining pairs
Follow steps five and six for each remaining pair of strings until all twelve are securely attached and tuned properly.

Congratulations! You now know how to restring a twelve string guitar like an expert. Remember to always take your time and be patient, as it may take a few tries to get the hang of it. With practice, you’ll soon be able to restring your guitar with ease whenever needed.

Understanding the Basics of a Twelve String Guitar

When you first lay your eyes on a twelve string guitar, it can look quite intimidating. But once you get to the heart of its design and sound, it’s like unveiling a magical musical instrument full of richness and depth. The twelve strings are arranged in six courses or pairs, typically with two identical strings tuned an octave apart. This gives the unique shimmering sound that defines twelve string guitars. Its body is usually larger than a regular six-string guitar, providing room for stronger resonations and fuller sounds.

Now let’s dive deeper into what makes this instrument special – its playing techniques! From strumming to fingerpicking, each technique has an incredible impact on the overall music produced from this complex creature of melody. When you strum across all twelve strings, it creates waves of harmonious tones that fill up any room with warmth and vibrancy. Fingerpicking on a twelve-string guitar adds another level of complexity but rewards you with intricate layers of sound every time your fingers dance across these paired strings.

  • Strumming: While basic chords still apply to a twelve-string guitar just as they do in their six-string counterparts, when played together they create beautiful jingles almost sounding like two guitars at once.
  • Fingerpicking:It’s not just limited to simple plucking; advanced techniques like hybrid picking or travis picking lend themselves brilliantly here too!

Unlocking the secrets behind understanding such an extraordinary instrument may seem daunting initially but believe me, once mastered it opens up new avenues in creating mesmerizing melodies.

Gathering the Necessary Tools and Materials for Restringing a Twelve String Guitar

The first step to restringing a twelve-string guitar is gathering all the necessary tools and materials. It’s like preparing a delicious dinner – you cannot start until you have everything in place! Before starting, ensure that you’ve assembled the following essentials:

  • New set of strings: You’ll want to choose high-quality strings that complement your instrument’s tone. There are many brands available, so look for one with good reviews or ask for advice at your local music store.
  • A wire cutter: This handy tool makes trimming long string ends quick and easy after installation.
  • A winding tool or peg winder: Though not strictly necessary, this gadget will speed up the process significantly by quickly winding the new strings onto their tuning pegs.
  • A tuner: Once those new strings are on, they’ll need fine-tuning (literally!).

In addition to these core items, it may also be beneficial to have some other supporting materials at hand when undertaking this task. These include a clean cloth, which can be used for wiping down your guitar before starting; as well as fretboard oil, if your fretboard looks particularly dry or worn out. A neck rest can aid in holding your guitar steady while changing its strings and maybe even a pair of gloves if you prefer not to risk nicks from sharp string ends.

Rounding Up!

Whether you’re doing this job yourself for the first time or an experienced guitarist looking forward to freshening up his/her favorite instrument’s sound, having these tools ready beforehand ensures smooth sailing during restringing process.

Read also: how to restring a twelve string guitar

Procedure to Properly Remove Old Strings from Your Twelve-String Guitar

Knowing how to properly remove the old strings from your twelve-string guitar is crucial if you want to keep it sounding its best. The procedure can feel a little daunting, especially for beginners, but with time and practice, you’ll find it quite straightforward. First things first: loosen the tension on each string by turning the tuning pegs slowly in a counter-clockwise direction. You don’t need any fancy tools here; your fingers will do just fine! Once all of them are loose enough that they’re no longer producing clear sound when strummed, carefully cut each one at about midpoint using wire cutters or string clippers.
Remember: always wear safety glasses because strings under tension could snap back unexpectedly.

Next comes pulling out the bridge pins – those little plastic or wooden pegs that hold your strings in place at the bottom end of your guitar’s body. For this task,

  • Gently lift up each loosened string around its corresponding pin.
  • Use a bridge pin puller tool (or carefully utilise pliers if absolutely necessary) to extract these pins without damaging them.

Afterwards, remove any remaining pieces of old strings on both ends – those coiled around tuning posts as well as fragments stuck inside bridges holes where bridge pins were inserted earlier.
In conclusion, taking time, staying patient and being gentle are key aspects when following these steps in order to achieve an effective yet damage-free removal of old strings from your twelve-string guitar.

How To Restring A Twelve String Guitar: Step-by-Step Guide For Beginnershow to restring a twelve string guitar

Step-by-Step Guide on How to Install New Strings a Twelve String Guitar

So, you’ve finally decided to change the strings on your twelve-string guitar? Awesome! Guitars can be a bit tricky, but with some patience and care, we’ll get you strumming in no time.

Before You Start, make sure to have all necessary tools at hand. This includes your new set of strings (make sure they are for a 12-string guitar), wire cutters, string winders and optionally some lubricant for the nut slots and bridge saddle.

To start off,

  1. Loosen up each string
  2. . Turn tuners anti-clockwise until there is enough slack so that you can pull them out of their pegs easily. Be careful not to let any loose ends go flying into your face or eyes; safety first!

  3. Remove old strings from tuning posts.
  4. This part might take a little fiddling around with pliers if they’re wound tightly.

Once done removing the old ones,

  1. Fit in new strings one by one.
  2. The lower octave pairs usually come color-coded or have different ball-ends so you don’t mix them up. Slip it through both the bridge and tuner post then begin winding gently but firmly clockwise till there’s tension again.

  3. Tune each pair correctly, typically EADGBE starting from top going down.
  4. You’d want both octaves matching perfectly – just as harmony intended!

In conclusion, changing your 12-string guitar’s strings may seem daunting at first glance especially due to its doubled number of courses compared to standard six-strings guitars. However with patient persistence coupled with this step-by-step guide provided here today; anyone would certainly find success eventually!

You may also like: p515 yamaha piano price

Tuning Your Newly Restrung Twelve String Guitar: Essential Tips and Tricks

Guitar Tuning 101

Who doesn’t get captivated by the melodious harmony of a twelve-string guitar? But to create that enchanting music, you need to know how to tune it perfectly. Any newly restrung twelve string guitar needs some serious tuning before it can sing its heart out. Whether you’re an experienced guitarist or just starting your journey, there are essential tips and tricks you should know.

A guitar tuner, which could be electronic or clip-on type is crucial for this task. After fixing new strings onto your guitar, always begin with the sixth pair – that’s the thickest strings closest to you when holding the guitar in playing position.

  • Tune each “pair” of strings together as though they were one.
  • The higher octave pairs (strings 1-4) should be tuned first followed by lower octave ones (strings 5 &6).

Your fret-hand fingers will thank you if ensure all the stings are properly stretched – simply pull them upwards gently away from the fretboard between tunings.

Remember that every single note matters so hear closely while tuning. Use a gentle touch while turning those pegs. Turning too fast can cause your freshly strung wires to break! Keep repeating these steps until all pairs sound harmoniously together; then let your fingers dance on those tautly poised strings.

Tuning requires patience but remember practice makes perfect! With these tips and trick up your sleeve, you’ll be coaxing beautiful tunes from your newly restrung twelve string guitar in no time!

Conclusion: Mastering the Art of Restringing a Twelve String Guitar

There’s a certain artistry that comes with restringing a twelve-string guitar. It’s much more than merely swapping out old strings for new ones; it’s about understanding and respecting the instrument. The rich, resonating sound of a twelve-string can only truly shine when its strings are fresh and perfectly in tune.

We begin by methodically removing the worn-out strings, ensuring not to damage the delicate wood of the guitar. In choosing new strings, we consider both their tonal quality and durability — from bright-sounding phosphor bronze to rugged nickel-wound steel. Using nimble fingers, we thread each string through its corresponding hole in the bridge before winding it onto its respective tuning peg on the headstock.

  • This task demands precision: a wrong move could produce an off-kilter tone or even harm our precious instrument.
  • The final step is always tuning – adjusting pitch until each string sings harmoniously with its twin.

In conclusion,

mastering this art doesn’t just maintain our beloved guitars; it deepens our connection to them and heightens our awareness of their unique voices. So don’t rush through this process! Take your time, enjoy every moment, because this chore can become meditative – like playing an intricate piece on your freshly strung six or indeed twelve-string symphony.

Read also: yamaha piano names